Bathroom Shampoo Shelf 260139

This bathroom shampoo shelf is designed in single shampoo bottles, you can hang body cream, shampoo,facial cream on it  beside shower fixture in bath.

Inquiry Now

Your message will be replied within 12 hours , All information will be protected !

General Details

Bathroom shampoo shelf is designed in single shampoo bottles, you can hang body cream, shampoo,facial cream on it  beside shower fixture in bath.

Ensure it can stand the pressure when you push bottle for liquid , the shower holder for shampoo comes with 2 pieces heavy duty rubber vacuum cups . Each suction cups can be hold weight up to 34 kg in average , so you needn’t worry about   dropping down, even yo push and press hardly .

To extend the use range of this shower soap and shampoo holders  on non-smooth and porous wall surface ,  silicone glue fixings included into box . So that it is a whole no screws wall mount solution for bath fittings .


  • No drilling and screws , tools required
  • Heavy duty suction cup for smooth wall surface
  • Silicone glue  for rough wall surface
  • ABS suction cap and base in white or chrome ,easy to clean
  • Stainless steel wire shampoo holders for small bottle or big bottle ,rust resistant
  • Remove and Reuse


  • Product size :10.5 x 6 x 10.5 cm
  • H.S. code :83025000
  • Rubber suction cup : diameter 73 mm , black color
  • Plastic ABS suction base and caps in white
  • Stainless steel wire shampoo holders  in electropolish finish
Packing Info

What’s in the box

  • suction cup : 2 pieces
  • stainless steel wire rack : 1 piece
  • 5 grams silicone glue  1 piece ,  glue base 2 pieces

Packing info

Packing (1set/polybag/box, 12pcs/ctn) Load quantity
Inner Box Size: 10.5×6×10.5 cm 20’GP: 33296 pcs
Outer Carton Size: 22.5×19.5×23 cm 40’GP: 68970 pcs
N.W.: 1.14 kg/ctn G.W.: 1.75 kg/ctn 40’HQ: 80862 pcs
How to Affix

The video shows you how to affix suction bathroom accessories with suction and glue, without using a drill or other tools. There is no damage to your wall surface; it can be reused and removed easily. It is water proof and moisture-free.


  • Suction

Suction installation: tiles, glass, plastic, metal coating or other smooth surfaces.

suction fix 3 steps

  • Glue

Installation by silicone glue : Application for tough surface-mosaic, wood, lime, latex paint, wallpaper, etc.

glue fix 6 steps


  1. Reuse notice: put suction into 45 degree warm water for 5 min, dry it off, then repeat above steps.
  2. Put your matter after a 2-hour test to be sure it is firm installation.
  3. Not recommended for valuable and fragile matter (such as clock, glass).

Frequently Asked Questions

  • What is the weight the suction can hold?

The Garbath patented suction system with advanced rubber materials, with the report from the 3rd party, shows: Recommended max. weight: 5kg for normal use in home , long lasting 2-3 years; pull down at average instant weight: 34kg

  • How long can the suction bear on loading ?

The key index to review suction performance is how long it can stand on certain weight .
Normally, we will only put under 5 kilograms of things for normal home use . As per the test report from the 3rd-party, the Garbath suction system can suck on tiles/glass firmly over 1008 days under 5 kilograms.

  • Can it be re-used?

The item affixed by vacuum suction can be re-used. When you want to fix another position, just wash it in warm water before re-using .

  • Can it be used on a non-smooth surface?

A. The vacuum suction system cannot be fixed a non-smooth surface; the airtight seal cannot appear according to vacuum theory on a rough position.
B . In this case, please affix by glue accessories included in the box.

  • Is it water-proof in the bathroom?

The vacuum suction system seals well after installation, so moisture and water cannot affect the use. It is water-proof .