Suction Shampoo Holder 260138

Suction  shampoo holder is designed in 3 pieces shampoo bottles, you can hang body cream, shampoo,facial cream on it  beside shower fixture in bath.

Inquiry Now

I'm not a robot: captcha

Your message will be replied within 12 hours , All information will be protected !

General Details

Suction  shampoo holder is designed in 3 pieces shampoo bottles, you can hang body cream, shampoo,facial cream on it  beside shower fixture in bath.

Ensure it can stand the pressure when you push bottle for liquid , the shower holder for shampoo comes with 2 pieces heavy duty rubber vacuum cups . Each suction cups can be hold weight up to 34 kg in average , so you needn’t worry about   dropping down, even yo push and press hardly .

To extend the use range of this shower soap and shampoo holders  on non-smooth and porous wall surface ,  silicone glue fixings included into box . So that it is a whole no screws wall mount solution for bath fittings .

Features

  • No drilling and screws , tools required
  • Heavy duty suction cup for smooth wall surface
  • Silicone glue  for rough wall surface
  • ABS suction cap and base in white or chrome ,easy to clean
  • Stainless steel wire shampoo holders for small bottle or big bottle ,rust resistant
  • Remove and Reuse

Specification

  • Product size :10.5 x 5.2 x 42.5 cm
  • H.S. code :83025000
  • Rubber suction cup : diameter 73 mm , black color
  • Plastic ABS suction base and caps in white
  • Stainless steel wire shampoo holders  in electropolish finish
Packing Info

What’s in the box

  • suction cup : 2 pieces
  • stainless steel wire rack : 1 piece
  • 10 grams silicone glue  1 piece ,  glue base 2 pieces

Packing info

Packing (1set/polybag/box, 12pcs/ctn) Load quantity
Inner Box Size: 10.5×5.2×42.5 cm 20’GP: 7944 pcs
Outer Carton Size: 46×26.5×34 cm 40’GP: 16188 pcs
N.W.: 4.28 kg/ctn G.W.: 6.08 kg/ctn 40’HQ: 18792 pcs
How to Affix

The video shows you how to affix suction bathroom accessories with suction and glue, without using a drill or other tools. There is no damage to your wall surface; it can be reused and removed easily. It is water proof and moisture-free.

 

  • Suction

Suction installation: tiles, glass, plastic, metal coating or other smooth surfaces.

suction fix 3 steps

  • Glue

Installation by silicone glue : Application for tough surface-mosaic, wood, lime, latex paint, wallpaper, etc.

glue fix 6 steps

Cautions:

  1. Reuse notice: put suction into 45 degree warm water for 5 min, dry it off, then repeat above steps.
  2. Put your matter after a 2-hour test to be sure it is firm installation.
  3. Not recommended for valuable and fragile matter (such as clock, glass).
FAQ

Frequently Asked Questions

  • What is the weight the suction can hold?

The Garbath patented suction system with advanced rubber materials, with the report from the 3rd party, shows: Recommended max. weight: 5kg for normal use in home , long lasting 2-3 years; pull down at average instant weight: 34kg

  • How long can the suction bear on loading ?

The key index to review suction performance is how long it can stand on certain weight .
Normally, we will only put under 5 kilograms of things for normal home use . As per the test report from the 3rd-party, the Garbath suction system can suck on tiles/glass firmly over 1008 days under 5 kilograms.

  • Can it be re-used?

The item affixed by vacuum suction can be re-used. When you want to fix another position, just wash it in warm water before re-using .

  • Can it be used on a non-smooth surface?

A. The vacuum suction system cannot be fixed a non-smooth surface; the airtight seal cannot appear according to vacuum theory on a rough position.
B . In this case, please affix by glue accessories included in the box.

  • Is it water-proof in the bathroom?

The vacuum suction system seals well after installation, so moisture and water cannot affect the use. It is water-proof .